U-Grooves.com - KV AUDIO - KV2 AUDIO EX 2.5 MK2 ACTIVE DUAL SUB

DOMOV // DJ OPREMA //
zvočniki - aktivni

KV AUDIO - KV2 AUDIO EX 2.5 MK2 ACTIVE DUAL SUB

€ 3480.00

Spletna stran proizvajalca: KV AUDIO - KV2 AUDIO EX 2.5 MK2 ACTIVE DUAL SUB

KV2 AUDIO EX 2.5 Mk2 ACTIVE DUAL SUB

1600-Wat-ni dvojni 15" aktivni subwoofer • Zmogljivi vgrajeni ojačevalec z tehnologijo podporne switch tehnologije in linearnim aktivnim filtrom. Zasnova akustične skrinje in postavitev zvočnikov omogoča več kot 134dB izhoda. Vgrajena podporna elektronika z eq.-jem, kretniškimi filtri, fazno kontrolo in zaščito ojačevalca. Levi in desni stereo ali mono izhodi z through ali high pass izhodi. Dva 15” zvočnika z visokim izkoristkom in 4” visokotempraturnim navitjem jedra. LED indikatorji za prisotnost signala, limiter, temperaturno zaščito in power ON statusom. Baltic birch ohišje z robustnim polimernim finišem. Dva ročaja za prenašanje in predpriprava za montažo koles za lažji transport.

The EX 2.5 Mk2 is a double 15” subwoofer and the ‘active’ brother of the ES 2.6 passive bass module. It provides depth and power that belies its size. The product uses the same low frequency amplifier found inside the EPAK 2500/2500R and features in-built stereo crossovers, High Pass outputs, and full overdrive protection. It also features a new Speaker Level output on a EP4 connector to drive one additional passive ES 2.6 subwoofer from its own internal amplifier. (Not to be used with a passive ES 2.5)

* High quality fixed installations.
* Large Portable PA Systems for A.V speech and multimedia playback.
* Medium to large -sized live music applications.
* Mobile DJ.
* Stand alone subwoofer to supplement an existing passive or active system.

System Acoustic Perfomance
-3dB Response 38Hz - 125Hz
-10dB Response 34Hz - 125Hz
Max SPL Long-term 134dB
Max SPL Peak 137dB
Crossover Point 125Hz

Low Frequency Section
Acoustic Design Twin Asymmetrical loading
Woofer Size/ Voice Coil Diameter/ Design 15" / 4" / Inside outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium

Signal Input
Input Impedance 20k?
Input Sensitivity 1.0V rms

Power Connector
Power Connector Neutrik PowerCon®

Physical Dimensions
Height 600mm (23.62")
Width 700mm (27.55")
Depth 750mm (29.52")
Weight 90kg (198.0lbs

Bass Amplifier Specification
Type High Efficiency Switching
Rated Continuous Power 1600W
Distortion <0.05%
Operating Bandwidth 34Hz - 125Hz

Slave speaker output
Slave speaker output EP4 output for ES 2.6 only

Recommended Amperage
Recommended Amperage 16A 115V | 8A 230V

Operating Voltage
Operating Voltage 100 - 120V @ 60Hz | 230 - 250V @ 50Hz