2500-watt ojačevalnik/kontroler za KV2 ES serijo zvočnikov. 100-watt HF ojačevalec A/B push-pull zasnova. 200 watt srednjetonski ojačevalec z A/B push pull zasnovo. 600 watt mid-bas ojačevalec z visokofrekvenčno, podporno switch tehnologijo in linearnim aktivnim filtrom. 1600 watt bas ojačevalec z visokim izkoristkom in switch tehnologijo. Vgrajena podporna elektronika z eq., aktivno fazno uskladitvijo, kretniškimi filtri, zaščito pred popačenjem in nasičenjem, izbirnikom konfiguracije in izhodno kontrolo. AC vezje za neslišni zagon. Pasivno hlajenje z reguliranim podpornim hlajenjem ventilatorjev. 6 preklopnih konfiguracij bas modulov. ATTACK in EXTENSION način delovanja. Material ohišja Baltic birch, ohišje z preklopnim predalom za shranjevanje vseh priklopnih kablov. Ročaji za prenos in kabli vključeni v komplet.

The EPAK 2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also controls the allocation of power depending on the number of bass modules employed. Unlike other active speaker systems, the EPAK 2500 allows placement of critical electronics remotely.

The EPAK 2500 is enclosed in a road-rugged Baltic birch cabinet with two corner handles and a built in cable storage compartment. Inside, the electronics mechanical assembly is mounted on an independent suspension system that isolates it from the shocks and impacts typically encountered on the road. A large aluminium heat sink provides passive cooling along with two demand-sensitive fans for added reliability.

Both EPAK's are supplied with these cables:
1 x MH60
1 x LF40
1 x LF15

To achieve increased output and throw you can set up two ES 1.0 cabinets to work together horizontally as a single loudspeaker system. This configuration will require two EPAK 2500/R’s per side and the use of the ‘Two per side’ switch to engage a specific set of filters and operating parameters required in this mode.

* Very high quality fixed installations.
* Professional portable PA Systems for large format AV speech and multimedia playback.
* Medium - sized live music applications.
* Professional Mobile DJ with ES 1.0 and ES series subwoofers.

Product EPAK2500
Signal Input
Input Impedance 20k?
Input Sensitivity 1.0V rms
Line Output Main Through ouput
Insert Connectors Insert point for Sub In/ Out

Power Connector
Power Connector Neutrik PowerCon®

Product Description
Product Description A 2500 watt four channel controller/amplifier pack with individual 1600W, 600W, 200W and 100W mono amplifiers.
Free standing unit contains all control, limiting, crossovers, phase correction, time alignment and system set up. Removable lid acts as storage for speaker cables and mains lead.

High Frequency Amplifier
Amplifier Type Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
Rated Continuous Power 100W
Distortion <0.05%
Operating Bandwidth 2.5kHz - 28kHz

Midrange Amplifier
Amplifier Type Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
Rated Continuous Power 200W
Distortion <0.05%
Operating Bandwidth 500Hz - 2.5kHz

Mid-Bass Amplifier
Amplifier Type High efficiency, high current, low frequency switching amplifier
Rated Continuous Power 600W
Distortion <0.05%
Operating Bandwidth 130Hz - 500Hz

Subwoofer Amplifier
Amplifier Type High efficiency, high current, low frequency switching amplifier
Rated Continuous Power 1600W
Distortion <0.05%
Operating Bandwidth 20Hz - 130Hz

Physical Dimensions
Height 700mm (27.55")
Width 450mm (17.71")
Depth 290mm (11.41")
Weight 32kg (70.4lbs)

Speaker Input /Output
Speaker Outputs One EP6 for ES 1.0 and one EP4 for ES series subwoofers

Recommended Amperage
Recommended Amperage 30A 115V | 16A 230V

System Set Up
System Set up Six position selector for a choice of ES subwoofer combinations

Level Control
Level Control Main input level +/- 6dB

Subwoofer Level Control
Subwoofer Level Control Internal Sub level +/- 6dB

Bass Management Switch
Bass Management Switch Attack or Extension switch for alternative Bass Character

Operating Voltage
Operating Voltage 100-120V @ 60Hz 230-250V @ 50Hz